DFT study the interaction of β‐cyclodextrin with benzyl azide and phenyl acetylene in synthesis of 1,2,3‐triazoles

The phenyl acetylene and benzyl azide cycloaddition reaction in water in the presence of β‐cyclodextrin (β‐CD) as a phase transfer catalyst (PTC) can get a better yield in a shorter time. The interaction between β‐CD and phenyl acetylene or benzyl azide plays an important role in this reaction. This paper studies the complexes of β‐CD with phenyl acetylene and benzyl azide using density functional theory (DFT) method. In order to find out the orientations of guests in the cavity of β‐CD, binding energy and deformation energy are investigated, and the calculated results are confirmed by ¹H nuclear magnetic resonance (¹HNMR). The data from single point energy indicate that the inclusion complexes can improve the solubilities of phenyl acetylene and benzyl azide in water. The ¹³C and ¹⁵N spectra show that the most obvious variation concentrates on C₆ and C₈ of phenyl acetylene and N₁₅ of benzyl azide in complexes. Mulliken charge and frontier orbital are employed for revealing the charge distribution. The effect of β‐CD is discussed in terms of the calculated parameters. Copyright © 2014 John Wiley & Sons, Ltd.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

紫光化合物[Cd(bpdc)(phen)_2(H_2O)]·6H_2O的合成、结构及荧光光谱研究

以2,4′-联苯二甲酸(H2bpdc)和1,10-邻菲罗啉(phen)为配体,采用水热法合成一例三维超分子网状镉(Ⅱ)配合物[Cd(bpdc)(phen)2(H2O)]·6H2O(1)。通过单晶X射线衍射分析,元素分析和红外光谱分析表征化合物1的结构。单晶X射线衍射分析结果表明,化合物1属于三斜晶系,P1空间群,中心金属Cd(Ⅱ)离子呈现六配位扭曲八面体构型,通过两种氢键作用和π—π堆积作用形成三维超分子结构。同时,对化合物1进行固态/溶液以及不同温度下的荧光性能测试。以350nm为激发波长进行激发,298K固态时,化合物1在390nm处有强发射峰,呈现紫色荧光;77K固态时,化合物1的荧光光谱具有两个发射谱带,分别位于380和520nm处,是因为在低温时化合物1表现出精细结构。298K时,化合物1在DMSO溶液和CH3OH溶液中分别在380和375nm有最大发射,相对于固态最大发射波长发生蓝移,呈现紫色荧光。这均是基于中心金属微扰配体中心的π*→π跃迁发射。研究了化合物1固态和溶液的荧光寿命,化合物1荧光衰减过程包含双组分。298K条件下,化合物1在DMSO溶液中的寿命(τ1=1.73μs和τ2=14.07μs)比CH3OH溶液中的荧光寿命(τ1=1.21μs和τ2=12.44μs)长。此外,77K固态时的荧光寿命(τ1=1.96μs和τ2=16.11μs)长于298K的固态荧光寿命(τ1=1.20μs和τ2=11.34μs),这是因为低温条件下降低分子内部的非辐射跃迁,从而延长固态荧光寿命。     

在同位旋空间中正反质子弹性散射的重整化混合圈链图效应

本文采用描述荷电和中性 pion 介子与核子-反核子强相互作用的同位旋SU(2)不变耦合模型,计算出在 pion0 重整化混合圈链图传播下 p pbar -> p pbar 弹性散射微分截面的“精确”解析结果;并且将此结果与在 pion0 树图传播下的微分截面作了对比分析,得到相应的辐射修正重要信息。本文完成的工作对进一步深入研究 pion 介子与核子-反核子强相互作用的同位旋SU(2)不变耦合模型以及深入理论探讨正反质子对撞实验,都将提供理论研究的参考价值。     

白藜芦醇顺反异构体及第一三重激发态结构的理论研究

在B3LYP/6-311++G(d,p)水平对白藜芦醇顺反异构体及第一三重激发态进行了结构优化、频率计算和自然键轨道(Natural Bond Orbital,NBO)分析.在MP2/6-311++G(d,p)//B3LYP/6-311++G(d,p)水平比较了白藜芦醇顺反异构体的能量.反式白藜芦醇整个分子呈平面结构,顺式白藜芦醇两苯环之间存在约30o扭角.第一三重激发态中两苯环几乎处于互相垂直的关系,C7-H5与C8-H6键也是几乎互相垂直的关系.顺式和反式白藜芦醇C7-C8的σ键成键情况分别为sp1.53-sp1.53和sp1.59-sp1.60,C7与C8各自提供p轨道形成π键,即形成C7=C8双键.三重态中,C7-C8的成键情况为sp1.92-sp1.89,没有p-pπ键,C7、C8均还有一个2p轨道未参与杂化,NBO分析证实C7、C8的各自剩下的2p轨道均几乎独立形成了高能量的反键轨道,分别垂直于单羟基和双羟基苯环,C7-C8键长明显长于白藜芦醇顺反异构体.顺式白藜芦醇比反式白藜芦醇的自由能高约1.3-2.5 kcal/mol,反式构型是热力学稳定构型.含时密度泛函方法(Time-Dependent Density Functional Theory,TD-DFT)方法,B3LYP/6-311++G(d,p)水平计算得反式和顺式白藜芦醇最强紫外吸收峰分别在330 nm和319 nm.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

谐振子势阱囚禁玻色气体的玻色-爱因斯坦凝聚

基于Thomas-Fermi半经典近似方法研究了谐振子势阱约束下任意维理想玻色气体的玻色-爱因斯坦凝聚(BEC)．导出了玻色气体的BEC转变温度、基态粒子占据比例、内能和热容量等物理量的解析表达式,讨论了空间维度和谐振子势阱的影响．以二维和三维玻色系统为例,数值计算了上述热力学量,并与解析结果进行了对比,二者获得了较好的吻合．     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.